Use a safe pry tool and run it between the glass and the metal frame. There are also 4 small screws one on each corner also needs to be removed.Remove the 6 big screws free on each sides. Remove two more screws and lift out the motherboard. Using a safe pry tool to pop off the antenna cable.Ease the flex ribbon back then remove the small Philip screw on beneath and also the one on the right on the phone. Release the pop connector of the flex ribbon using a safe pry tool.Using the safe pry tool, release the pop connector for the camera. Remove the 5 pop connectors at the top of the phone. Lift out the vibrator motor using a safe pry tool. Using a small Philip screw driver removes the 5 screws. Use a safe pry tool to pop out the battery connector.Remove the small screw on the battery connector using a small Philips screwdriver. Push up the back cover and then lift to remove. Remove 2 screws from the bottom of the phone using either a small Phillips screwdriver or a special 5 point screwdriver, depending on when the iPhone 4 was manufactured. First turn off the iPhone 4 and remove the sim card.Using this summary in correlation with the video will insure proper instructions are given and a safe repair is made. iPhone 4S LCD, Touch Screen Digitizer, & Battery Replacement Summary: ![]() ![]() ![]() To simply reassemble your iPhone 4S, use this video in reverse.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |